Bearing and isolation solutions for precast and cast-in-place concrete, steel, masonry and timber structures in industrial and civil buildings. Our products are used in column, beam, floor slab and stair flight supports, as well as in balcony, facade bracket and cantilever connections. We provide technical advice on all our products and, where needed, carry out a detailed analysis and provide calculations to support the proposed solutions.
- Non-reinforced elastomeric bearings
TYPE 5, TYPE 10, LINEAR SI, TYPE TMBR - Sliding bearings and strips
SLIDELINE, SLIDEBLOCK, SLIDEBLOCK HD - EN 1337-3 elastomeric bearings, CE marked
TYPE A, TYPE B, TYPE C, TYPE D, TYPE E, TYPE F
- Impact sound and vibration insulation
TYPE W - Load-bearing thermal breaks to eliminate thermal bridges
THERMO X - Engineering support
We advise from proposal to implementation, carry out analysis and provide calculations
Non-reinforced elastomeric bearings
Metalbeta manufactures elastomeric bearing pads – neoprene bearing pads and strips – for precast and cast-in-place concrete, steel, masonry and timber structures.
Sliding bearings and supports
Sliding bearings and sliding supports (PTFE elastomeric sliding bearings) are designed for concrete and steel structures whose elements must be able to move at the support.
Vibration isolation and impact sound insulation
Impact sound insulation for stairs and vibration isolation that remains elastic when the element rotates.
Structural thermal breaks
Structural thermal break pads – a load-bearing and energy-efficient solution for interrupting thermal bridges in steel and concrete connections.
EN 1337-3 bearings
Laminated and plain elastomeric bearings to EN 1337-3, CE marked – types A, B, C, D, E and F.
Not sure which product to choose?
Send us the loads or project drawings – we’ll select the right product.
Send inquiry